Wireless Controls and Automation

Industrial Wireless Radio Controls 

Transmitter & Receiver   943301

3 km (2 Miles)   line-of-sight w Yagi antenna
Operation:  120/240VAC or 12VDC
Transmitter input N/O Dry contact
Relay Output SPDT, 6A Class 2 pilot duty
Heavy Duty NEMA4, IP65 UL Fiber enclosure
License free 430 - 450MHz Industrial ISM band
Factory configured systems, Ready to operate
No setup or programming required
 Operation  2 Ch  Transmitter Receiver
 Continuous Close switch Ch 1
Close switch Ch 2
Relay 1  ON
Relay 2  ON

   Specifications      Digital Transmitter
Supply power 120/240VAC or 12VDC /  5watt 
Inputs  N/O Normally Open, digital dry contact
Transmitter power per FCC Part 15.249,  50mV/m @ 3m
Transmission Digital Encoded   Gaussian_frequency-shift_keying
Channels 16 addresses per system  GFSK
Input Wiring Din Terminals,  Dry Contact
Response Loop 500 msec
Weight 12 lb (5.40kg)  each unit
Dimensions * 10"W x 8"H x 4"D (254 x 200 x 100 mm) * may vary

   Specifications      Digital Receiver 
Supply power 120/240VAC or 12VDC /  5watt 
Output   Relay 6Amp, Class 2 pilot duty
Frequency 433 MHz  • License free Industrial ISM band
Configuration DIP switch factory preset
Compliance FCC CFR part 15.247, 95 sub E
Wiring Screw Terminals
Antenna Z 50 Ohm SMA RF connector
Ambient temp  14 to 140 F (-10 to 60 C)
Enclosure  NEMA4, IP65 Fiber UL listed

 Optional Solar power pack


Radio control equipment in not to be used in life safety.
Radio Installations shall be performed by a certified professional.

      Wireless Range from: 3 Km   (2 Miles )
 Optional Extended range up to to 16 Km (10 Miles)
Industrial Monitoring, Pump control, Monitor remote instruments, sensors,
Lighting control, Packing and mobile system, PLC remote, SCADA,
Factory process control,  Alarms, Generators,  Solar,  Wire replacement.

   .Please request a quotation

   Part      Channel   Options:
943301  Single (1)
943302  Two  (2)   
943304  Four (4)  
  High, Low Status level indicator lamp
Fail Safe module
Battery Backup module


Package include:  One  Base Transmitter, One  Base Receiver 
Two Yagi 938432 Antennas with 10ft coaxial cable,
NEMA 4 Fiber enclosures & Instructions


  Transmitter 4 Channel

   Receiver 4 Channel

Typical application example

Remote Command & Monitor



     Copyright   Electrodepot. All rights reserved