Industrial wireless monitoring and control systems


3 Miles (5 km) or more

Request a Quotation


Unlimited application Digital Wireless



Long Range 4 Channel

Request a Quotation


Remote control operation
Gas and oil pipeline alarm
Power monitoring
Perimeter protection
Solar systems monitoring
Remote I/O PLC controller
Long range target control
Avionics and Marine operation
Gates and access systems

Automatic pump control
Tank level monitoring
Long range alarm systems
Factory automation
Lighting controls
Irrigation System
Traffic Controller
Mobile operation
Wire replacement


5 Miles ( 8 km ) line of sight w Hi-Gain antenna
Extended range 10 miles and optional repeaters
Encoded system with 65,536 digital 16 bit codes

Simple DIP switch programming setup
System is Solar Ready 12VDC operation
Unlimited transmitter
and receivers can be added
No programming or internet required
27 MHz license free section industrial band

Power per FCC Part 15.249,  50mV/m @ 3m
Circuit board Compliance with UL796 and UL 94
MIL-STD-461E for Electro-Magnetic Interference (EMI)
MIL-STD-901D Grade A for High Impact Shock
MIL-STD-167B for Vibration


 Transmitter Input: Dry Contact
 Receiver Output  Pulse, One Shot N/O and N/C relay 1 Amp @ 32 VDC
 Operation frequency: 27 MHz digital encoded, industrial band
 Operating Temperature: -4 to +140 F (-20 to +60 C)
 Housing: weather-resistant NEMA 4 enclosure
 Dimensions: 11.5"W x 8.5"H x 4"D (240 x 230 x 100 mm)
                     "Final dimension may vary"
 Operation voltage: 12VDC, 15W 120/220VAC Power supply included
 Power: Transmitter standby >0.001 mA, energized 2A (1 Sec.),
 Power draw: Receiver standby 30mA, energized 120mA
 Transmission loop 500 miliseconds
Short pulse transmission comply MIL standard

 Antenna 50 ohm,

  Optional UL, CSA and CE Enclosure Request form  

Special Relays
RF  Components

Coaxial UHF in line, Lighting Arrestor 
RF Test equipment

SWR/RF/Field Strength Meter  
Coaxial Cable w Connectors

Solar power supply Kit  

  Antenna Range Calculator

  DISCLAIMER:  Radio control equipment is not to be used in life safety. Radio control systems are subject to applications, environmental and atmospheric conditions,
   We are not liable of failures on miss applications, radio black outs or interruption of the transmissions.  Radio Installations shall be performed by a certified professional.
     Copyright  Electrodepot is a  registered trade name of AM Products inc-