Wireless Controls and Automation  
   
 

Industrial Wireless Radio Controls 

Basic System:  One  Base Transmitter, One  Base Receiver 
Two 34" Omni Antennas with 12ft coaxial cable, NEMA 4 Enclosures & Instructions

Part #

Description Price
915404  Basic System 4 Channel
 Transmitter and Receiver

    $1,979.99    

915414  Receiver 4 Channel

    $999.99    

915424  Transmitter 4 Channel

    $998.99    

915408  Basic System  8 Channel
 Transmitter and Receiver
 
915418   Receiver 8 Channel  
915428   Transmitter 8 Channel  

Accessory # Description Price
   Fail Safe sequence module  
   Battery Backup module  
   High, Low Status level indicator lamp  
   Automatic Start/Stop module    
     

 

 

 



 

DISCLAIMER: 
Radio control equipment in not to be used in life safety.
Radio Installations shall be performed by a certified professional.
 

   Long Range Wireless Systems  915400   FCC Certified ID: OHKFMT154

Applications:

Industrial Monitoring, Pump control, Monitor remote sites, Tank Level,
Lighting control, Remote Mobile system, PLC remote, SCADA, Gates.
Factory process control,  Alarms, Generators
Solar,  Wire replacement.
 


 Performance
6 miles ( 10 km ) line-of-sight w Omni 3.5dBi antenna
 Extended range up to 20 km
Receiver with signal strength indicator ■■■ ■ ■
Operation: 120/240VAC or 12VDC
Transmitter input N/O Dry contact
Relay Output SPDT, 10A @250VAC Class 2 pilot duty
Heavy Duty NEMA4, IP65  enclosure
License free operation MURS band
Factory configured systems, Ready to operate
No setup or programming required
Not limited to line-of-sight communication

 

   Specifications      Digital Transmitter
Supply power 120/240VAC or 12VDC /  5watt 
Inputs  N/O Normally Open, digital dry contact
Transmitter power per FCC Part 15.249,  50mV/m @ 3m
Transmission Digital Encoded   Gaussian_frequency-shift_keying
Channels 16 addresses per system  GFSK
Input Wiring Din Terminals,  Dry Contact
Response Loop 500 msec
Weight 6.8 lb (3.40kg)  each unit
Dimensions (*) 10"W x 8"H x 4"D (254 x 200 x 100 mm)
FCC ID OHKFMT154 Class B Devices:  Designation 20KOF1D

   Specifications      Digital Receiver 
Supply power 120/240VAC or 12VDC /  5watt 
Output   Relay  6Amp, Class 2 pilot duty
Frequency 154MHz  • License free MURS band
Configuration DIP switch factory preset
Compliance FCC CFR part 15.247, 95 sub E
Wiring Screw Terminals
Antenna Z 50 Ohm
Ambient temp  14 to 140 F (-10 to 60 C)
Enclosure  NEMA4, IP65 

  (*)  Final Component layout and Dimension may vary    

  Antenna Selection


    
(1)  Continuous operation maximum 5 minutes by FCC

     
     Copyright   Electrodepot. All rights reserved