Wireless Controls and Automation
 

Industrial Wireless Radio Controls

 
 
Please Request latest price

915428  Two Channel  System:

One Transmitter 2 Ch in NEM4 Enclosure
One Receiver in NEM4 Enclosure
Two Omni Antennas 931487
  Antenna Selection


Operation: Example
If Low Level SW1 Close:,  Pump Start.
If High Level SW2  Close:,  Pump Stop.



    


Please Request latest price

915427  Single Channel  System:

One Transmitter One  Ch in NEM4 Enclosure
One Receiver in NEM4 Enclosure
Two Omni Antennas 931487
  Antenna Selection


Operation: Example
If Low Level SW1 Close:,  Pump Start.
If High Level SW1  Open:,  Pump Stop.

 

 

DISCLAIMER: 
Radio control equipment in not to be used in life safety.
Radio Installations shall be performed by a certified professional.

 

   Remote operation for: Pumps, Lighting, Process, Alarms, Gates, Valves.
 

Performance

5 miles ( 8 km) line-of-sight w Omni antenna
 Extended range up to 20 km
Operation:  120/240VAC or 12VDC
Transmitter input N/O Dry contact
Receiver with signal strength indicator
• Relay Output SPDT, 6A Class 2 pilot duty
Heavy Duty NEMA4, IP65 UL Fiber enclosure
• License free 154MHz Industrial MURS band
• Factory configured systems, Ready to operate
• No setup or programming required

Applications:

Industrial Monitoring, Pump control, Monitor remote sites, Tank Level,
Lighting control, Remote Mobile system, PLC remote, SCADA, Gates.
Factory process control,  Alarms, Generators
Solar,  Wire replacement.

 
■ Specifications 915427 & 945428  
   Specifications      Digital Transmitter
Supply power 120/240VAC or 12VDC /  8watt 
Inputs  N/O Normally Open, digital dry contact
Transmitter power per FCC Part 15.249,  50mV/m @ 3m
Transmission Digital Encoded Gaussian_frequency-shift_keying
Channels 16 addresses per system  GFSK
Power Consumption Standby 1mA, Transmission Pulse 1200mA  Solar Ready
Response Loop 500 msec
Weight 6.8 lb (3.40kg)  each unit
(*) Dimensions  12"W x 10"H x 6"D (300 x 250 x 150 mm)

   Specifications      Digital Receiver 
Supply power 120/240VAC or 12VDC /  5watt 
Output   Relay 10Amp, SPST Class 2 pilot duty
Frequency 154MHz  • License free MURS band
Configuration DIP switch factory preset
Compliance FCC CFR part 15.247, 95 sub E
Wiring Screw Terminals
Antenna Z 50 Ohm
Ambient temp  14° to 140° F (-10° to 60° C)
Enclosure  NEMA4, IP65 
(*) Final Component layout and Dimension may vary

 


             915428  Typical wiring application example
 


System with  Status Display High and Low Indicators

 

 

     Copyright ©  Electrodepot. All rights reserved