| Operating Frequency: |
315 MHz |
| Data Format: |
DX format |
| Number of Codes: |
1,048,575 |
| Channels: |
One channel |
| Measured Range: |
700 feet in one quadrant with transmitter |
| Operating Temperature: |
32° to 140° F (0° to 60° C) |
| Sensitivity: |
-95 dBm (typical) |
| Number of Stored Transmitter |
32 Codes: per receiver |
| Receiver Output: |
"C" relay contact, 1 amp, at 32 VDC per channel |
| Field Selectable Receiver Output Modes: |
Momentary, four seconds (factory set)
Momentary, one second
Flip-flop toggle
latch, 4-Channel only |
|
MODE BUTTON (one per channel)
|
| Learn Mode: |
Press and release to enter learn mode |
Transmitters
Learned: |
Press and hold for five seconds after the last LED flash to delete all transmitters on an associated channel |
| Erase Memory: |
Press and hold for five seconds after the last LED flash to delete all transmitters on an associated channel |
| Clear Latch: |
Press and release |
| Clear Low Battery: |
Press and release mode switch on channel (936004 only) to clear low battery |
|
LED INDICATOR
|
| Steady: |
Indicates "learn" mode |
| Flashing: |
Indicates number of transmitters learned on the selected channel |
| RF Activity: |
Blinks synchronously with detected RF activity |
| Antenna: |
Wire lead, Optional external kit |
| Input Impedance: |
75 Ohm - 2:1 VSWR |
| Operating Voltage: |
11 to 17.5 VDC - 12 to 16 VAC |
| Current: |
25 mA at standby at 12 VDC
60 mA in alarm at 12 VDC |
| Connectors: |
Screw terminal,+,-, with N/O, N/C, and common per receiver channel |
| Dimensions: |
5.5 in L x 1.25 in W x 4 in H (140 x 32 x 102 mm), excluding antenna |
| Accessories: |
Mounting bracket, screws, and anchors (supplied) |
| Regulatory Requirements: |
FCC and DOC |
