|
Optional Control Modules for Migro Wireless
Systems
Start Stop Control Module
9SS1
9SS1 Start/Stop Receiver output Module
OPERATION: Transmitter sends a momentary
pulse via Channel One (1) to START;
the Receiver
Control Module Output turns ON. It will stay ON Until
the transmitter
sends the STOP signal via Channel Two
(2) to turn the Receiver Output OFF
Fail Safe Control Module
9FS1
Operation:
Transmitter sends an interval
pulse as long as the input is activated by a
control,
switch or sensor etc. The Receiver at
the other end turns the output ON decodes the
interval to
verify the status of the
transmitter, If the Transmitter, Finalizes the
control action, or a power or
carrier loss
occurs, then the Receiver decoder will
acknowledge and turn the Receiver output
OFF.
|
|
DISCLAIMER:
Radio control equipment
in not to be used in life safety.
Radio Installations shall be performed by a certified
professional |
.
| Copyright © Electrodepot. All rights reserved
| |
Home