|
Transmitter and Receiver for
2 Miles of
Line-of-Sight range
Up to 10 Miles with
optional
Long Range Antenna
|
OPERATION: |
Pre programmer panel for a three float circuit application,
On (Low) contact closure sends a pulse to start the pump process,
On (Stop) contact closure sends a pulse to stop the pump process,
With (Overflow) a second stop signal
is transmitted to end the pump process |
Wiring diagram example
DISCLAIMER:
Contact a licensed professional for your project.
Warning:
Radio control equipment is not to be used in life safety
|
 |
Special order
include:
1 Transmitter set 937144
1 Receiver set 937044
2 Antennas,
21"
omni
2
NEMA 4X non metallic enclosure
2 Power adapters 12VDC
1
Wiring Diagram |
|
Voltage: |
12 to
15. VDC |
|
Temperature: |
-4° to +140° F (-20° to +60° C) |
|
Receiver Type: |
Digital Superheterodyne
-118 dB |
|
Frequency |
27,255 MHz |
|
Codes: |
65,536
DIP switch programming |
|
Current
Drain |
Receiver 25 mA, standby, 195 mA operation
Transmitter 1 mA standby, 2 Amp 7 sec. |
|
Data
process |
Encoded Loop response 500 ms. |
|
Relay Output |
10 Amp
max 30VDC - 250VAC
N/0 and N/C |
|
Antenna |
50 Ohms
Quarter Wave, Antenna
optional |
|
Dimensions: |
12 in L x 10 in W x 4 in H
(254 x
200 x 100 mm) |
|
Weight |
6
lb.
(3 Kg) each |
|
Enclosure |
NEMA 4X non
metallic |
|
Home
Support
Checkout
